|
|
|
|
 |
|
Each sheet is produced from low carbon steel plates up to 5/16" thick. The junctions of the strand and bond form a ridged surface for improved tractions. Grating is formed like a truss so that every inter-connecting strand acts as a structural member distributing the load stress in several directions across the supporting frame.
The angular position of the strand and the bond makes the expanded metal grating stronger in deflection than steel plate material in original form.
This product is available only in the regular or standard type and is not flattened.
Typical applications include long length or catwalk grating - usually in 10 ft. lengths by 2 or 3 ft. widths. It is also ideal for flooring, platforms and stair treads, where principal use is for light storage and foot traffic.
Expanded Metal Grating can be made from carbon steel, stainless steel or aluminum in styles from 1/4" to 1 1/2" |
|
| STYLES |
|
| Expanded Metal Grating is available in the following distinct styles: |
|
 2.0 LB., 3.0 LB., 4.0 LB., 5.0 LB., 6.25 LB., 7.0 LB. |
| |
 3.14 LB. |
| |
 4.27 LB. |
| |
| EXPANDED METAL CATWALK GRATING |
| |
| When considering lightweight, economical catwalk alternatives, consider reverse flow Expanded Metal Catwalk Grating. Manufactured with the LWD spanning the width (short dimension) of the sheet, Catwalk Grating is commonly stocked in 2'-0, 2'-6, and 4'-0 wide sheets. These products can often be installed on walkways without waste or additional shearing charges |
 |
| |
| STANDARD FLOW EXPANDED METAL GRATING |
| |
 |
| |
| REVERSE FLOW EXPANDED METAL CATWALK GRATING |
|
|
|
|
|
|
|
|
